Operator Comfort
The rear-view camera allows the operator full view of the rear of the machine on the in cab 5.7″ color display. Along with a large panoramic rear-view mirror for enhanced visibility to the rear of the machine.
Serviceability
The TL6R features a tilt back operator’s station and large removable belly pans making routine maintenance and cleaning easy to perform.
Durability
The heavy-duty rear door was designed to provide years of service and dependability while protecting the radiator and hydraulic oil cooler in the event of a rear impact.
Performance
The TL6R comes with active power control that maintains engine power for optimal performance and can be engaged or disengaged by the operator during use.
TL6R
Track Loader
The TL6R features a radial lift track loader design and meets all current emission standards. With a height of 6 ft 5.8 in and a width of just over 5 ft the dimensions of the TL6R allow it to excel on job sites that may have height and width restrictions. This track loader comes with a newly designed cabin with an overhead 5.7” color multi-informational display and backlit rocker switches that control a variety of machine functions. The TL6R comes standard with a quiet track design with flotation pads that reduces vibration, noise levels, and improves ride quality.
Machine Specs and Dimensions
TL6R Specs
| OPERATING PERFORMANCE | ||
|---|---|---|
| Operating Weight - Canopy | 7,485 lb | (3,395 kg) |
| Operating Weight - Cab | 7,780 lb | (3,530 kg) |
| Tipping Load | 5,269 lb | (2,390 kg) |
| Rated Operating Capacity, SAE J818* | 1,841 lb | (835 kg) |
| Operating Load at 50% of Tipping Load | 2,635 lb | (1,195 kg) |
| Bucket Breakout Force | 5,930 lb | (2,690 kg) |
| Lift Arm Breakout Force | 4,860 lb | (2,205 kg) |
| Traction Force | 8,655 lb | (3,926 kg) |
| Ground Pressure - 12.6" Track | 5.1 psi | (34.8 kPa) |
| Travel Speed - Low | 4.3 mph | (7.0 km/hr) |
| Travel Speed - High | 6.2 mph | (10.0 km/hr) |
| *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load. | ||
| HYDRAULIC SYSTEM | ||
| Auxiliary Flow - Primary Circuit | 17.8 gpm | (67.4 Lpm) |
| Hydraulic System Pressure | 2,988 psi | (20.6 MPa) |
| ENGINE | ||
| Make / Model | Kubota / V2403-CR-TE4B | |
| Engine Displacement | 148.5 cu in | (2.4 L) |
| Horsepower @ 2,700 rpm | 65.2 hp | (48.6 kW) |
| Maximum Torque @ 1,500 rpm | 144.3 ft-lb | (195.6 Nm) |
| FLUID CAPACITIES | ||
| Engine Lubrication | 7.6 qt | (7.2 L) |
| Cooling System | 14.0 qt | (13.0 L) |
| Fuel Tank Capacity | 20.0 gal | (75.7 L) |
| Fuel Consumption (65% of Full Load) | 2.69 gal/hr | (10.2 L /hr) |
| Hydraulic Reservoir Capacity | 7.9 gal | (30.0 L) |
| Hydraulic System Capacity | 13.5 gal | (51.0 L) |
TL6R Dimensions
| MACHINE DIMENSIONS | ||
|---|---|---|
| Max. Lift Height to Bucket Pin | 9 ft 6.4 in | (2,905 mm) |
| Dump Height Fully Raised | 7 ft 5.6 in | (2,275 mm) |
| Dump Reach Fully Raised | 1 ft 10.0 in | (560 mm) |
| Dump Angle | 38° | |
| Rollback Angle | 31° | |
| Track Ground Contact Length | 4 ft 6.9 in | (1,395 mm) |
| Machine Length | 8 ft 9.9 in | (2,689 mm) |
| Transport Length | 10 ft 11.1 in | (3,330 mm) |
| Transport Height | 6 ft 5.8 in | (1,975 mm) |
| Departure Angle | 30° | |
| Clearance Circle with Bucket | 6 ft 10.5 in | (2,095 mm) |
| Clearance Circle without Bucket | 4 ft 6.9 in | (1,395 mm) |
| Clearance Circle Rear | 4 ft 11.8 in | (1,520 mm) |
| Track Width | 12.6 in | (320 mm) |
| Ground Clearance | 9.1 in | (230 mm) |
| Overall Width without Bucket | 5 ft 0.2 in | (1,530 mm) |
Machine Features
TL6R Features
| ENGINE |
|---|
| U.S. EPA Final Tier 4 Emission Compliant |
| Turbocharged |
| DOC+DPF Exhaust After Treatment |
| Active Power Control Power Management System |
| Working Modes - Power and ECO |
| Automatic Fuel Bleed System |
| High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame |
| Dual Element Air Filter |
| ELECTRICAL |
| Sealed Rocker Switches |
| 12 volt System with 60 amp Alternator |
| Work Lights, Front and Rear |
| Engine Preheat |
| Hour Meter |
| Back-up Alarm |
| Horn |
| UNDERCARRIAGE AND FRAME |
| Permanently Sealed Track Rollers with Metal Face Seals |
| Double and Triple Flange Track Rollers |
| Fully Welded Frame with Integrated Cross Members |
| Front and Rear Tie-Down and Lift Points |
| Integrated Rear Bumper |
| 2 Speed Travel |
| 12.6" Quiet Ride Track Design |
| OPERATOR'S STATION |
| 5.7" Color Multi-Informational Display with Rear View Camera |
| Tilt-up Operator's Station |
| Deluxe Adjustable Suspension Seat |
| Rear Pivoting Seat Bar with Integrated Arm Rest |
| ROPS / FOPS Structure |
| Retractable 2" Seat Belt |
| Retractable 3" Seat Belt (optional) |
| 3 Point Retractable Seat Belt (optional) |
| Pressurized Cab with Swing Out Door, A/C, Heat, Defrost and Front Wiper (optional) |
| AM/FM/MP3 Radio with NOAA Weatherband (optional) |
| HYDRAULIC & WORKING EQUIPMENT |
| Cushioned Boom Cylinders |
| Boom Float with Detent |
| Hydraulic Pilot Controls |
| Proportional Auxiliary Controls with Detent |
| Pressure Relieving 1/2" Flat Faced Coupler Body |
| 14-Pin Connector |
| Hydraulic Self Leveling |
| Mechanical Quick Coupler (Canopy) |
| Hydraulic Quick Coupler - Cab - Standard Equipment |
| Hydraulic Quick Coupler - Canopy - optional |
| Primary Flow Auxiliary Hydraulics 18.4 gpm |
FEATURES AND BENEFITS
All Steel Construction
- Increases strength and rigidity while protecting vital engine and hydraulic components
- Model specific undercarriage components with larger bearings results in slower shaft speed extending the life of the components
Radial Lift Loader Design
- Excels in grading and dirt work
- Greater bucket breakout and lift arm forces
- Greater mid-height reach for backfilling
Deluxe Operator Station
- The 5.7″ multifunction color display provides machine health and vitals while also allowing the operator to control a multitude of machine features and functions.
- Rear view camera adds peace of mind with real time view of the rear of the machine
- Deluxe high back adjustable suspension reduces operator fatigue while providing greater visibility to the work equipment
- Pressurized cab helps cut down on debris inside cabin improving air quality
- Swing out door keeps over all machine height lower allowing access into areas with height restrictions.
Heavy Duty Undercarriage
- Features double and triple flange track rollers that maintain at least two points of contact at all times making the machine less susceptible to detracking
- Quiet ride track design greatly reduces noise and vibration improving ride quality
Ease of Maintenance
- Tilt up operators station, heavy duty rear door and large lockable service hoods provide easy access to daily maintenance and service points.
- Large side by side cooling module swings out to easily clean both sides of the radiator keeping the hydraulic system running cool and efficiently.
Overall Height and Width
- Compact size allow access to areas with height and width restrictions
Spin Turn Assist
- Automatically shifts the machine to low torque mode to assist when performing spin turn
Takeuchi Fleet Management
- 2 Year Standard Service
- Minimize Downtime
- Remote Diagnostics
- Utilization Tracking
- Proactive Maintenance
- Control Costs
- Geofencing
